MOS scale: Difference between revisions

Line 30:

== Naming ==

Any MOS can be clearly specified by giving its [[signature]], i.e. the number of small and large steps, which is typically notated e.g. "5L 2s," and its equave. Sometimes, if one simply wants to talk about step sizes without specifying which is large and small, the notation "5a 2b" is used (which could refer to either [[5L 2s|diatonic]] or [[2L 5s|anti-diatonic]]).

Any MOS can be clearly and uniquely specified by giving its [[signature]], i.e. the number of small and large steps, which is typically notated e.g. "5L 2s," and its equave. Sometimes, if one simply wants to talk about step sizes without specifying which is large and small, the notation "5a 2b" is used (which could refer to either [[5L 2s|diatonic]] or [[2L 5s|anti-diatonic]]).

By default, the [[equave]] of a mos ''a''L ''b''s is assumed to be [[2/1]]. To specify a non-octave equave, "{{angbr|equave}}" is placed after the signature, e.g. {{mos scalesig|4L 5s<3/1>|link=1}}. Using angle brackets (<code>&#x27E8;</code> and <code>&#x27E9;</code>) is recommended; using greater-than and less-than signs ("<equave>") can also be done, but this can conflict with HTML and other uses of these symbols.

@@ Line 30: / Line 30: @@
 == Naming ==
-Any MOS can be clearly specified by giving its [[signature]], i.e. the number of small and large steps, which is typically notated e.g. "5L&nbsp;2s," and its equave. Sometimes, if one simply wants to talk about step sizes without specifying which is large and small, the notation "5a&nbsp;2b" is used (which could refer to either [[5L 2s|diatonic]] or [[2L 5s|anti-diatonic]]).
+Any MOS can be clearly and uniquely specified by giving its [[signature]], i.e. the number of small and large steps, which is typically notated e.g. "5L&nbsp;2s," and its equave. Sometimes, if one simply wants to talk about step sizes without specifying which is large and small, the notation "5a&nbsp;2b" is used (which could refer to either [[5L 2s|diatonic]] or [[2L 5s|anti-diatonic]]).
 By default, the [[equave]] of a mos ''a''L&nbsp;''b''s is assumed to be [[2/1]]. To specify a non-octave equave, "{{angbr|equave}}" is placed after the signature, e.g. {{mos scalesig|4L 5s<3/1>|link=1}}. Using angle brackets (<code>&amp;#x27E8;</code> and <code>&amp;#x27E9;</code>) is recommended; using greater-than and less-than signs ("&lt;equave&gt;") can also be done, but this can conflict with HTML and other uses of these symbols.