Kite'sthoughts on twin squares: Difference between revisions
No edit summary |
Mark term as idiosyncratic (seems new), markup, categories, mark for review |
||
Line 1: | Line 1: | ||
Twin | '''Twin squares'''{{idiosyncratic}} (term proposed by [[Kite Giedraitis]]) is a format for presenting a [[regular temperament]]. The [[gencom]] matrix G is shown side by side with its inverse, the [[mapping matrix]] M. M is transposed so that rows multiply with rows. 5-limit meantone temperament, with period 2/1, generator 3/2 and comma 81/80: | ||
<math> | <math> | ||
Line 56: | Line 56: | ||
* temper out that comma | * temper out that comma | ||
* discard the row in M that corresponds to that comma | * discard the row in M that corresponds to that comma | ||
[[Category:Mapping]] | |||
{{todo|review}} |
Revision as of 05:15, 19 December 2023
Twin squares[idiosyncratic term] (term proposed by Kite Giedraitis) is a format for presenting a regular temperament. The gencom matrix G is shown side by side with its inverse, the mapping matrix M. M is transposed so that rows multiply with rows. 5-limit meantone temperament, with period 2/1, generator 3/2 and comma 81/80:
[math]\displaystyle{ G = \left[ \begin{array} {rrr} per \\ gen \\ com \\ \end{array} \right] = \left[ \begin{array} {rrr} 1 & 0 & 0 \\ -1 & 1 & 0 \\ -4 & 4 & -1 \\ \end{array} \right] M = \left[ \begin{array} {rrr} 1 & 1 & 0 \\ 0 & 1 & 4 \\ 0 & 0 & -1 \\ \end{array} \right] }[/math]
[math]\displaystyle{ \begin{array} {rrr} per \\ gen \\ com \\ \end{array} \left[ \begin{array} {rrr} 1 & 0 & 0 \\ -1 & 1 & 0 \\ -4 & 4 & -1 \\ \end{array} \right] \left[ \begin{array} {rrr} 1 & 1 & 0 \\ 0 & 1 & 4 \\ 0 & 0 & -1 \\ \end{array} \right] }[/math]
These two matrices can be considered to be a simple basis change from 2.3.5 to 2.3/2.81/80. Meantone can be thought of as a basis change, with one of the new basis members vanishing, thus projecting from 3-D to 2-D.
The dot product of any row in G with any row in M is 1 if the 2 rows are opposite each other (e.g. 2nd row of each matrix), and 0 if not (e.g. 1st row of G and 3rd row of M).
RTT can be explained in 3 steps:
- perform a basis change with one of the new generators being comma-sized
- temper out that comma
- discard the row in M that corresponds to that comma