Talk:EDO vs ET
Opening statements
This page starts out by stating that ED2s inherently require a pure octave, but I don't think that this is true. "ED2" only describes that the octave is equally divided. It seems perfectly possible for this octave to be stretched or compressed (for reasons that have nothing to do with tempering or temperaments).
I also don't think it's a good idea to describe ETs as taking ED2s and adding a conceptual layer, as is done immediately afterward. One could just as easily say that an ED2 is a layer we add on top of an ET, as a tuning of it (in this context, with ED2 implying a pure octave). I think these two objects start from different places and neither one is best described as a layer on the other.
So how would I revise this opening sentence? Well, I started trying to figure this out, and I ended up with a sizeable chunk of writing. And I realized that it was generally nicer to speak about the difference between EDs and ETs, that is, leaving the equally-divided interval unspecified, for a more direct naming comparison. Anyway, so I'm not suggesting replacing the whole article, but perhaps some of the following might be incorporated into it:
Both [math]\displaystyle{ n }[/math]-ED2 and [math]\displaystyle{ n }[/math]-ET refer to a set of equal-spaced pitches, where that repeating step size is somewhere close to 1200/[math]\displaystyle{ n }[/math] cents; for example, 12-ED2 and 12-ET are both pitch systems that use a repeating step size of 1200/12 = 100 ¢. For many readers, this is all they would ever care to know, and further distinctions will seem pedantic; these readers may now feel free to excuse themselves. Other readers, however, will want to understand the different conceptual implications of these names. These readers should stay with us.
The fundamental difference between the two types of pitch system can be made clear just from the names alone: EDs name an interval that is divided, while ETs do not.
- EDs are the straightforward way to name divisions of intervals like [math]\displaystyle{ \frac21 }[/math], [math]\displaystyle{ \frac31 }[/math], or [math]\displaystyle{ \frac32 }[/math] into [math]\displaystyle{ n }[/math] equal steps. We do this using the names [math]\displaystyle{ n }[/math]-ED2, [math]\displaystyle{ n }[/math]-ED3, or [math]\displaystyle{ n }[/math]-ED3/2, respectively. These are alternatively written as [math]\displaystyle{ n }[/math]-EDO, [math]\displaystyle{ n }[/math]-EDT, or [math]\displaystyle{ n }[/math]-EDF, for "Octave", "Tritave", and "Fifth".
- On the other hand, [math]\displaystyle{ n }[/math]-ETs do not explicitly name an interval like this. Their names instead convey that they are a temperament — specifically, they a regular temperament — which has one size of step (i.e. all steps are equal) and that they map some key interval to [math]\displaystyle{ n }[/math] of those steps. As for which particular interval that is, it is implicitly assumed to be the octave, [math]\displaystyle{ \frac21 }[/math], and in cases where we may want to break from this octave-based assumption, we have no clear built-in naming convention to follow here.[1]
Here are three other important differences between EDs and ETs:
- Re: JI. EDs have nothing to do with it. ETs are for approximating it. An ED tells us to divide an interval into equal steps, and that's all. Certainly, you could play an approximation of JI music in an ED, but there's nothing about EDs that is inherently related to JI. On the other hand, ETs are a concept from regular temperament theory (RTT) and are thus specifically designed to approximate JI. (Technically, temperaments can approximate things other than JI, too, but JI is the overwhelmingly popular choice.)
- Re: finding the approximation of JI intervals: EDs round, and ETs map. As we just mentioned, EDs have nothing in particular to do with JI; that said, whenever we do want to know what an ED's closest approximation of a JI interval is, we simply round each interval's pitch (as measured e.g. in cents) to the nearest step count. With ETs, however, we map each interval's frequency ratio — using its prime composition — to some step count, which is not necessarily nearest by pitch rounding.
- For each integer [math]\displaystyle{ n }[/math], there's only one [math]\displaystyle{ n }[/math]-ED2, but there are many [math]\displaystyle{ n }[/math]-ETs. An [math]\displaystyle{ n }[/math]-ED2 is already a fully-specified pitch set, but [math]\displaystyle{ n }[/math]-ET is not quite there yet. For starters, there are different [math]\displaystyle{ n }[/math]-ETs for each prime limit, while EDs have nothing in particular to do with primes or prime limits. And more interestingly, we have cases such as [math]\displaystyle{ n }[/math] = 17 at the 5-limit where we find more than one reasonable equal temperament: we have 17p-ET with map ⟨17 27 39], but we also have 17c-ET with map ⟨17 27 40].
- ↑ A tritave-based temperament might be named b13-ET, using an advanced feature of the commonplace wart notation, where prefixing the 'b' — given that 'b' is the second letter of the alphabet — tells us to start mapping with the 2nd prime harmonic, which we know is [math]\displaystyle{ \frac31 }[/math]. But once we get to treating non-primes such as [math]\displaystyle{ \frac32 }[/math] as the key interval to name our temperament after, wart notation uses 'q' for any and all of those intervals, so we lack any conventional way to distinguish an equal temperament that divides [math]\displaystyle{ \frac32 }[/math] into 13 steps from one that instead divides [math]\displaystyle{ \frac53 }[/math] into 13 steps; both of these temperaments would be named q13-ET. At this point it'd better to spell out the temperament's domain bases and maps, like so: 3/2.5.7 ⟨13 52 63] and 5/3.7.11 ⟨13 50 61].