User:Contribution/Chanofreq Project: Difference between revisions
Contribution (talk | contribs) |
Contribution (talk | contribs) |
||
| Line 63: | Line 63: | ||
=== Frequency settings === | === Frequency settings === | ||
By default, the parameters are set to: minfreq = 0 Hz, maxfreq = 21474.83648 Hz, and bitfreq = 32-bit. | By default, the frequency parameters are set to: minfreq = 0 Hz, maxfreq = 21474.83648 Hz, and bitfreq = 32-bit. | ||
With these default settings, Z has a precision of five decimal places with an additional sixth decimal place that must be either 0 or 5. This configuration is optimized for compatibility with the human hearing range and 32-bit hardware and software systems, while minimizing phase errors across all frequencies. In the worst-case scenario, 1 phase error would occur approximately once every 4.6 days. These default settings are suitable for most applications, but there is flexibility to modify '''minfreq''' and '''maxfreq''', and to use smaller or larger integer data types with '''bitfreq''' as needed. | With these default settings, Z has a precision of five decimal places with an additional sixth decimal place that must be either 0 or 5. This configuration is optimized for compatibility with the human hearing range and 32-bit hardware and software systems, while minimizing phase errors across all frequencies. In the worst-case scenario, 1 phase error would occur approximately once every 4.6 days. These default settings are suitable for most applications, but there is flexibility to modify '''minfreq''' and '''maxfreq''', and to use smaller or larger integer data types with '''bitfreq''' as needed. | ||