Template:MOS gamut/doc: Difference between revisions

Line 1:

This template is used for mos pages and similar pages to list the note names of a mos for a given step ratio.

Line 7:

! Parameters !! Required? !! Description

|-

| <pre>Scale Signature</pre> || Yes (optional on mos pages) || The mos's scale signature in the form "xL ys", or for non-octave mosses, ~~<nowiki>~~"xL ys<p/q>"~~</nowiki>~~, "xL ys⟨p/q⟩", or "xL ys (p/q-equivalent)". If left blank and used on a mos page, then the page's title will be used.

| <pre>Scale Signature</pre> || Yes (optional on mos pages) || The mos's scale signature in the form "xL ys", or for non-octave mosses, "xL ys<p/q>", "xL ys⟨p/q⟩", or "xL ys (p/q-equivalent)". If left blank and used on a mos page, then the page's title will be used.

|-

| <pre>Step Ratio</pre> || No (optional) || The step ratio of the mos, denoted as a fraction p/q and separated with a slash. If left blank, then the step ratio "2/1" is used by default.

Line 13:

| <pre>UDP</pre> || No (optional) || The UDP representing the mode for which notation is applied. Due to technical limitations, using the pipe symbol is not advised and the "," character (comma) should be used instead.

|-

| <pre>Notation</pre> || No (optional) || The notation for note names, consisting of the naturals (written without separators), sharp symbol, and flat symbol, each separated by semicolons. For example, standard notation is entered as "CDEFGAB; #; b". If left blank, the default is diamond-MOS notation (JKLMNOP for naturals, & for the sharp symbol, and @ for the flat symbol), or if the scale signature is 5L 2s, the default is standard notation.

| <pre>Notation</pre> || No (optional) || The notation for note names, consisting of the naturals (written without separators), sharp symbol, and flat symbol, each separated by semicolons. For example, standard notation is entered as "CDEFGAB; #; b". If left blank, the default is diamond-MOS notation (JKLMNOP for naturals, & for the sharp symbol, and @ for the flat symbol), or if the scale signature is 5L 2s, the default is standard notation.

|}

Line 46:

<pre>{{MOS gamut|Scale Signature = 5L 2s|Step Ratio = 4/2}}</pre>

{{{{ROOTPAGENAME}}|Scale Signature = 5L 2s|Step Ratio = 4/2}}

Specific symbols for double-accidentals, such as "x" for double-sharps, are not supported.

Line 57:

<pre>{{MOS gamut|Scale Signature = 5L 2s|Step Ratio = 1/0}}</pre>

{{{{ROOTPAGENAME}}|Scale Signature = 5L 2s|Step Ratio = 1/0}}

~~=== See also ===~~

* {{modlink}}

@@ Line 1: / Line 1: @@
-{{dochead}}
+{{dochead}}{{modlink}}
 This template is used for mos pages and similar pages to list the note names of a mos for a given step ratio.
@@ Line 7: / Line 7: @@
 ! Parameters !! Required? !! Description
 |-
-| <pre>Scale Signature</pre> || Yes (optional on mos pages) || The mos's scale signature in the form "xL ys", or for non-octave mosses, <nowiki>"xL ys<p/q>"</nowiki>, "xL ys⟨p/q⟩", or "xL ys (p/q-equivalent)". If left blank and used on a mos page, then the page's title will be used.
+| <pre>Scale Signature</pre> || Yes (optional on mos pages) || The mos's scale signature in the form "xL&nbsp;ys", or for non-octave mosses, "xL&nbsp;ys&lt;p/q&gt;", "xL&nbsp;ys⟨p/q⟩", or "xL&nbsp;ys&nbsp;(p/q-equivalent)". If left blank and used on a mos page, then the page's title will be used.
 |-
 | <pre>Step Ratio</pre> || No (optional) || The step ratio of the mos, denoted as a fraction p/q and separated with a slash. If left blank, then the step ratio "2/1" is used by default.
@@ Line 13: / Line 13: @@
 | <pre>UDP</pre> || No (optional) || The UDP representing the mode for which notation is applied. Due to technical limitations, using the pipe symbol is not advised and the "," character (comma) should be used instead.
 |-
-| <pre>Notation</pre> || No (optional) || The notation for note names, consisting of the naturals (written without separators), sharp symbol, and flat symbol, each separated by semicolons. For example, standard notation is entered as "CDEFGAB; #; b". If left blank, the default is diamond-MOS notation (JKLMNOP for naturals, & for the sharp symbol, and @ for the flat symbol), or if the scale signature is 5L 2s, the default is standard notation.
+| <pre>Notation</pre> || No (optional) || The notation for note names, consisting of the naturals (written without separators), sharp symbol, and flat symbol, each separated by semicolons. For example, standard notation is entered as "CDEFGAB; #; b". If left blank, the default is diamond-MOS notation (JKLMNOP for naturals, & for the sharp symbol, and @ for the flat symbol), or if the scale signature is 5L&nbsp;2s, the default is standard notation.
 |}
@@ Line 46: / Line 46: @@
 <pre>{{MOS gamut|Scale Signature = 5L 2s|Step Ratio = 4/2}}</pre>
-{{MOS gamut|Scale Signature = 5L 2s|Step Ratio = 4/2}}
+{{{{ROOTPAGENAME}}|Scale Signature = 5L 2s|Step Ratio = 4/2}}
 Specific symbols for double-accidentals, such as "x" for double-sharps, are not supported.
@@ Line 57: / Line 57: @@
 <pre>{{MOS gamut|Scale Signature = 5L 2s|Step Ratio = 1/0}}</pre>
 {{{{ROOTPAGENAME}}|Scale Signature = 5L 2s|Step Ratio = 1/0}}
-=== See also ===
-* {{modlink}}