User:Contribution/Chanofreq Project: Difference between revisions

Line 19:

* '''Z:''' A decimal number within the range '''minfreq''' ≤ Z < '''maxfreq''', representing the frequency in Hertz. This value is encoded as a positive integer by the parser with a bit depth defined by '''bitfreq''', using the formula: parser_frequency = int(((Z - minfreq) * (2 ** bitfreq) / (maxfreq - minfreq)) + 0.5). Original default settings are set to: minfreq = 0 Hz, maxfreq = 18446.744073709551616 Hz, and bitfreq = 64. Thus, Z has a precision of fifteen decimal places. Parsers designed for 32-bit hardware and software should adopt the alternative default settings: minfreq = 0 Hz, maxfreq = 21474.83648 Hz, and bitfreq = 32. By doing so, the Z frequencies specified by users for the original default mode remain compatible, and maintain a precision of five decimal places with an additional sixth decimal place rounded to either 0 or 5, offering a convenient solution.

{{todo|Simplify|inline=1|comment=Use 64-bit ~~float~~ precision as the standard, ~~with~~ the bitfreq workaround ~~as an~~ optional ~~setting~~.}}

{{todo|Simplify|inline=1|comment=Use 64-bit floating-point precision as the default standard, and make the bitfreq workaround optional for systems not supporting 64-bit floats.}}

Commands can be separated by a semicolon (';') or a newline.

@@ Line 19: / Line 19: @@
 * '''Z:''' A decimal number within the range '''minfreq''' ≤ Z < '''maxfreq''', representing the frequency in Hertz. This value is encoded as a positive integer by the parser with a bit depth defined by '''bitfreq''', using the formula: parser_frequency = int(((Z - minfreq) * (2 ** bitfreq) / (maxfreq - minfreq)) + 0.5). Original default settings are set to: minfreq = 0 Hz, maxfreq = 18446.744073709551616 Hz, and bitfreq = 64. Thus, Z has a precision of fifteen decimal places. Parsers designed for 32-bit hardware and software should adopt the alternative default settings: minfreq = 0 Hz, maxfreq = 21474.83648 Hz, and bitfreq = 32. By doing so, the Z frequencies specified by users for the original default mode remain compatible, and maintain a precision of five decimal places with an additional sixth decimal place rounded to either 0 or 5, offering a convenient solution.
-{{todo|Simplify|inline=1|comment=Use 64-bit float precision as the standard, with the bitfreq workaround as an optional setting.}}
+{{todo|Simplify|inline=1|comment=Use 64-bit floating-point precision as the default standard, and make the bitfreq workaround optional for systems not supporting 64-bit floats.}}
 Commands can be separated by a semicolon (';') or a newline.